Browse all practice questions for the CDC 3E551 Engineering Journeyman Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

CDC 3E551 Engineering Journeyman Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • When repair slope matches runway slope, the crater profile measurement lanes are arranged in what relation to the runway centerline?
  • When exporting a .dwg to a shapefile, how many shapefile types are output by default?
  • When a multifile shapefile is opened in the catalog, it is typically treated as
  • Which analysis produces a layer from the spatial intersection of input features?
  • In the Toolbox, under which list is the Merge tool located?
  • What is the name of the bulky soil subdivision most often found near streambeds or beaches?
  • The precision requirements of a survey are determined primarily by its
  • Which format is used by the DoD as an alternative to the CSI Master Format?
  • What UTC characteristic allows BOB units to be transported by air, sea, and land?
  • When does a construction inspector begin recording construction progress data?
  • During crater profile measurement, crater profile measurement is used to assess what property of soil?
  • The government acquisition regulation that provides guidance on ethics in contracting is known as what?
  • When planning site layout, which AFPAM will you utilize?
  • Which pair of standards are used for enduring construction?
  • What is the main source of information when creating a bill of materials (BOM)?
  • Which contour option controls how often a labeled contour line is generated?
  • Which specification format does the DoD use instead of the CSI Master Format?
  • For Static survey, which two files are required for post-processing?
  • Under which menu and tab in Catalog do we find the 'Metadata Style' setting?
  • For installing survey monuments, which soil types are most common?
  • Which technical drawing set contains a general layout of the construction project?
  • MOS stands for
  • In runway surface condition reporting, what is the code for ice on the runway?
  • Under which tab do we find the Process Baselines tool?
  • Where in the controller menus can you find the horizontal angle (HA) / vertical angle (VA) collimation test function?
  • What does the acronym CPM stand for in the context of crater repair assessment?
  • If the uncorrected PAPI distance is 765 feet, the correction is 90 feet, and the elevation at the threshold is higher than the PAPI location, what is the corrected PAPI distance?
  • Which tool allows you to change a polygon into a Geospatial Expeditionary Planning Tool (GeoExPT) airfield surface, such as a runway?
  • In the model file naming convention, what does the sheet sequence number indicate?
  • Which statement correctly matches an IP stake to its distance from the left edge?
  • What do we add to change a five-dimensional (5D) Building Information Modeling (BIM) design into six-dimensional (6D)?
  • Replacing pavement reference marking system coordinates with military grid reference system coordinates yields an accuracy of?
  • What kind of analysis creates a layer comprised of intersected or united data?
  • Which two files do we need to post-process the survey data for a Static survey?
  • In the Export Map window, which two settings adjust the quality of the output image?
  • What two primary reasons make shallow or standing water undesirable?
  • In the model file naming convention, what comes last just before the file extension?
  • Which contour option allows you to adjust the frequency of contour lines?
  • DPI stands for which of the following terms?
  • We have two survey receivers but only one controller. The logging device setting for the rover is
  • During the XML import wizard, which page provides a summary of changes after resolving name conflicts?
  • OPUS reports that Rapid-Static surveys are less than how many hours?
  • We prefer level-loop surveys because we can check the
  • Which Department of Defense (DOD) standard do spatial validation report Space Naming conventions follow?
  • What system is used to classify soils based on the size of individual particles?
  • Which attribute is used to identify sieve openings when openings are smaller than 1/4 inch?
  • In a non-dispersed layout, what number of feet is the minimum width of the utility lane?
  • Performed on materials passing the number 40 sieve, which test helps determine whether a soil is clayey (C) or silty (M)?
  • The import wizard for XML files has three windows; which window lists name conflicts?
  • In the best-case scenario or ideal survey times, which value is better if it is lower?
  • What do we call additional information we want to collect and assign to feature codes?
  • In what publication can the quantity-distance (QD) criteria be found?
  • Where in the post-processing software can you find the feature definition manager?
  • Which GNSS planning screen would you open to configure survey location coordinates?
  • Buffers can be formed as a set of rings based on what factor?
  • In the Runway Surface Condition (RSC) box, how is ice on the runway documented?
  • Subtype functions are located in which GIS program component?
  • When establishing a pavement reference marking system (PRMS), which rule establishes left and right of the centerline when facing away from the runway zero point?
  • How does catalog view and treat multifile shapefiles?
  • Which contract type allows the base civil engineer (BCE) to have a construction contractor already under contract?
  • In road curve staking, which set of positions is used as the basis?
  • Where are aircraft parking spacing distances measured from with regard to the aircraft?
  • Which operation creates a link between two tables to access related records without merging?
  • Which AFPAM volume is referenced for site layout planning guidelines?
  • In BIM, which approach ties geometry to parameters so changes propagate automatically?
  • Which parameter increases the resolution of a line feature representation?
  • When receiving an Air Force Form 3000 from a contractor, which of these do you NOT do?
  • What Air Force Information Management Tool, completed by the construction inspector, is used to prove or disprove contractor performance?
  • Which document contains the start date and duration/performance period of the contract?
  • What type of detail identifier marks the location of general sections or typical methods of construction?
  • When plotting spalls as polygons, which step comes immediately before the final step of adding the estimated number?
  • When setting up real-time kinematic (RTK) survey styles, how do we access the radio settings?
  • From which three positions are road curves staked?
  • Because someone unfamiliar with surveying may use your field notes, the field notes must be
  • Regarding minimum operating surface naming, what does 'UM' mean?
  • What do we call the applications used to create estimates, model an object, or create a schedule?
  • Which settings control the image quality when exporting a map?
  • Which option is used to convert a polygon into a GeoExPT airfield surface, such as a runway?
  • What is the Web address for the OPUS processing service?
  • What does the Army call their SABER style system?
  • The response e-mail from OPUS has a lot of information; what information are we looking for to adjust our survey data?
  • Which government handbook provides detailed instructions for properly completing government estimates?
  • When installing offset grade stakes, the placement interval is based on which factor?
  • At what interval, in feet, are pavement reference marking system (PRMS) markers placed?
  • After setting up the base receiver, we can disconnect the controller; which base option allows us to do this?
  • What is a flexible, adaptable model of a building, or building parts already modeled and ready for use?
  • Bronze disk monuments are best suited for which materials?
  • Which instrument is used to evaluate soil strength by recording blows at fixed penetration increments?
  • Which distance option is defined by an attribute rather than a fixed value?
  • Which equation do we use to check if batter boards are square?
  • Taxiway intersections with the MOS are marked by three cones, spaced three feet apart, in what formation?
  • Which combination of equipment is required to install slope stakes?
  • How many approach lighting marker cones are placed off the minimum operating strip (MOS), and at what interval?
  • Which trigonometry function is used to calculate the uncorrected precision approach path indicator (PAPI) distance?
  • Where is the Create Contours tool located?
  • The ratio of the size of drawn objects compared to their actual counterparts is called
  • In sieve analysis, soils that pass the number 200 sieve are classified as what?
  • In asphalt mix components, which element serves as the binder?
  • Which item is included in the minimum title block for construction drawings?
  • To ensure the 3-4-5 triangle process is efficient, you should have a single
  • Which datum is the North American Datum used as the basis for civil surveying?
  • According to the Data Frame Properties, which tab allows us to choose a coordinate system for the map?
  • Which two sections on the aircraft operation chart determine the operational lengths?
  • Which term describes representing a curved surface on a plane for mapping?
  • What do we call a group of applications produced by a vendor or vendors that interact to create a model?
  • At what angle are the center deadman anchor stakes placed from the standard fairlead beam?
  • In the conversion from millimeters to feet, which operation is correct?
  • Level-loop surveys are preferred because they allow verification of which aspect of the survey?
  • Which concept describes a flexible, adaptable model of a building or parts already modeled and ready for use?
  • After how many blows without penetrating deeper, should you remove the drive rod, change locations, and restart the dynamic cone penetrometer (DCP) test?
  • If the elevation at the threshold is lower than the elevation at the uncorrected PAPI location, how should the PAPIs be moved?
  • To what is the ground rod value equal?
  • The system that classifies soils by particle size is abbreviated USCS. Which full name does USCS stand for?
  • What factor has varying effects on the cohesion of soil?
  • Increasing the number of points used to define a line feature primarily increases the line's what?
  • Which file extension stores the shapefile's projection information?
  • Temporary monument markers are expected to last for how many years?
  • In the geodatabase context menu, under Import, what tool do we use to import a schema?
  • A two-way relationship between data tables is called what?
  • We convert most raster, or image, files by changing the
  • In the mission data set, which data set identifies planned future development?
  • Which method is used in conjunction with the equation w = (Ww / Ws) x 100 to determine moisture content?
  • In a non-dispersed layout, how many feet is the distance between buildings in a row?
  • A basic orthographic projection shows an object from how many different views?
  • When creating a surface, into which simple geometric shape does the software group the points?
  • Which part of the Statement of Work provides a detailed statement of what we expect to be done during the project?
  • What six feature definition types are in the feature code libraries?
  • Who completes the constructability review?
  • When receiving AF Form 3000 from a contractor, which action is NOT performed?
  • What indicates the exact grade elevations to the construction force?
  • OSCRE is associated with standards in which area?
  • A bearing of 'South 60 degrees East' translates to an azimuth of
  • When adjusting the guide stake elevations, what is the distance, in inches, from the PAPI base to the center of the light lenses?
  • Which installation characteristic helps prevent sewer blockage buildup?
  • At a minimum, the title block includes all the following EXCEPT?
  • Which stakes convey the exact grade elevations to the construction force?
  • Convert 30°10'20" into decimal degrees to three decimals.
  • Which of the following is NOT a concrete test method?
  • Which option lists the acronym GeoExPT in full?
  • Which component of the Federal Acquisition Regulation (FAR) provides guidance on the solicitation or acceptance of gifts or favors from contractors?
  • What is the first topology rule for vector data listed in the text?
  • Which combination of equipment is required to install slope stakes?
  • Who monitors task completion and reports it to unit control center (UCC) leadership?
  • Which team is responsible for comparing the crater repair with the repair quality criteria value?
  • Which mission data set represents the planning districts of the installation?
  • What term describes a subsurface detonation that creates a void beneath the pavement?
  • What is the interval for edge markers after the arresting system?
  • When converting a spreadsheet to a feature class, where must the file output be located?
  • Regarding installing survey monuments, what are the two most common soil types?
  • Which of the following is NOT a valid file type for feature code libraries?
  • Which form of solid modeling represents a shape by a set of mathematical functions?
  • With the exception of the "Convert" tool, what three ways can parking aprons/areas be added to the scenario?
  • What do we call the moisture content at which a soil stops being rigid and becomes moldable?
  • FAA stands for what in aviation terms?
  • Which step follows backsighting the previous station and plunging the scope when staking from an intermediate setup?
  • The moisture content defined by the equation w = (Ww / Ws) x 100 is called?
  • Which coordinate system is used to replace PRMS coordinates in the field?
  • Which engineering discipline is concerned with the circulation of liquids or gases, such as water or air?
  • What term describes the relationship between the parts of a project and their environment?
  • What do we call a projection that preserves angles?
  • At what decimal feet must the 2-peg test results be before the instrument needs calibration?
  • Which dataset would you consult to view current land use patterns within an installation?
  • What term describes the distance from the center of one patch area to the center of the next patch area?
  • How wide is the fire lane when planning a non-dispersed layout?
  • As displayed on the OPUS Website, Rapid-Static surveys are less than but Static surveys are more than how many hours?
  • How do we decide the proportion of misclosure a latitude or departure receives?
  • Which stake has a distance of 80 feet from the left edge?
  • PRMS orientation rule: which option describes the rule used to determine left and right?
  • When a repair patch and the one immediately after need to be repaired flush, how is that noted?
  • Which setting in the Aircraft Parking Panel, in the Aircraft tab, allows you to adjust the number of aircraft to be parked on the parking area?
  • When a munition penetrates the surface of the pavement and detonates underground, leaving a void, what is it called?
  • Which drawing type is specifically used to show exterior elevations and vertical relationships of a building?
  • Which menu path opens the option to customize metadata styles in ArcCatalog?
  • As of 2017, federal agencies, including the Department of Defense (DOD), were ordered to discontinue the use of which satellite constellation?
  • What is a beneficial characteristic of the 3-4-5 triangle layout?
  • To minimize damage from an explosion, toward which side of a facility should the blast occur?
  • What three input fields do we specify when using the Create Feature Class from XY Table tool?
  • Why is parking aircraft fighters at 45-degree angles an efficient way to achieve safety?
  • What does the soil sample roll test measure?
  • What is the most common stadia interval ratio in surveying in the United States?
  • Which file format does the OPUS Web service require to process survey data?
  • What are the four file types for feature code libraries?
  • Which toolbar has tools for creating graphics as opposed to vector data?
  • What term describes the ability to highlight or subdue aspects of a drawing?
  • When retrieving files from the receiver, which General Survey menu do we select first?
  • Which statement correctly describes the approach lighting marker cones placed off the MOS?
  • Which SOW component specifies the exact tasks to be performed?
  • What do we add to change a four-dimensional (4D) Building Information Modeling (BIM) design into five-dimensional (5D)?
  • When placing the center deadman anchor stakes, at what angle, in degrees, are they placed from the standard fairlead beam?
  • Which lighting system is designed for long-range lighting in austere environments?
  • For coordinate system transformations ranking, which option is most suitable on top?
  • ROWPU stands for which of the following?
  • Buffers can be created based on a specified distance, an attribute distance, or as what?
  • What value minus the height of instrument (HI) equals the elevation?
  • In which geographic information system program are subtype functions located?
  • How many seconds do we set our post-processed kinematic (PPK) observation times to in order to ensure sub-centimeter accuracy?
  • Which stakes are used to communicate finish elevations to the crew?
  • How much fuel in gallons per hour does one 60 kilowatt mobile electric power generator use?
  • Which form is used to document changes made to a system after construction completion?
  • What does PRMS stand for in pavement marking systems?
  • Which of the following is NOT a primary access/egress limitation?
  • During a statistical analysis, which option is NOT an output field?
  • Which GNSS Planning Online screen lists and provides satellite information in different constellations and allows you to include or ignore specific satellites?
  • Which soil property does the Dynamic Cone Penetrometer primarily measure?
  • What is the primary safety benefit of parking aircraft at 45-degree angles on the apron?
  • To save a georeferenced image as a new file, we select 'Georeferencing' on the tool bar then
  • Which form provides an accurate accounting of the changes made to each system after construction completion?
  • By what name do we refer to the space between any points A and B?
  • When sieve sizes have openings smaller than 1/4 inch, how are they identified?
  • RPCS is used to categorize and name real property; which option lists RPCS most directly?
  • To what elevation value are the tops of blue top stakes equal?
  • What is the web address for the CAD-BIM library?
  • To make it easier for the equipment operators, grade stakes are marked to the nearest which interval?
  • In the 3-4-5 triangle process, the project should have a single ...
  • To ensure that each blow to the dynamic cone penetrometer anvil has the same force, what action must take place with regards to the hammer?
  • Where can you find details regarding facility force protection?
  • In BIM terminology, what does 5D add to a 4D (time) model?
  • Contour fidelity in grid-based generation improves with higher what?
  • Which of the four files that make up a shapefile contains the coordinate system?
  • In the shine test, what does a definite shine indicate about the clay's classification?
  • The Air Force Information Management Tool used to document contractor performance is which of the following?
  • What are the three types of models we can create when generating a schema?
  • What do we call a way of differentiating objects within the same feature class?
  • When correcting magnetic north to grid north, how do you handle an easterly declination?
  • How many minutes does the MAOS team have to come up with MOS candidates?
  • How many edge markers are placed on either side of the threshold and departure ends of the MOS?
  • How far off the edge of the minimum operating strip (MOS) are distance-to-go (DTG) markers placed?
  • During which force module do we establish communications and prepare the airfield for initial flight operations?
  • Which name do we refer to soils passing the number 200 sieve?
  • What code is defined as a grouping of equipment and personnel capable of carrying out a specific function?
  • The names of items in a legend replicate the names of
  • Index contour frequency affects how often labeled contours appear. Which option represents this control?
  • What scale is the standard-sized airfield map used by the minimum airfield-operating surface team?
  • Which system is commonly used to map large areas using zones with a grid?
  • Building Information Modeling (BIM) combines the best of 2D and 3D drafting with which technology?
  • Which form is typically completed by the facility manager?
  • Where is the Text Style Manager tool located in the survey software?
  • Which role is the administrative arm of the EOC?
  • To determine the amount of cut or fill, which pair of rod readings is used?
  • When looking for imagery of a mishap location, what is a good backup source for imagery?
  • In BIM terminology, which term describes a group of vendor-supplied applications that interact to create a model?
  • In the model file naming convention, which element designates the discipline in the file name?
  • When is ionospheric information available for quality control?
  • The inboard PAPI stake is placed how many feet from the left edge of the runway?
  • Which tool provides the most control over the buffer creation process?
  • Which analysis is also referred to as 'least cost routing'?
  • Which combination of initial beddown contingency construction standards is used?
  • What do we call the relationship between the number of dynamic cone penetrometer (DCP) blows and its depth of penetration?
  • Which type of geodatabase can have multiple editors but only if they work on different parts of the data?
  • In Building Information Modeling (BIM), what name do we apply to rules that determine an objects geometry?
  • The amount of cut or fill is equal to which difference?
  • How many edge markers are placed on either side of the MOS threshold and departure ends?
  • Which metric in GNSS quality metrics is explicitly described as better when lower?
  • Which document contains Bare Base Conceptual Planning guidance as per the source material?
  • Which statistic measures how many observations fall into a category?
  • The sum of foresight (FS) and adjusted cut (ADJ CUT) is used to verify which trench attribute?
  • What feature code library command starts a line at a point?
  • Which lighting system is used to provide lighting in remote areas?
  • In VBIED explosions, which parts cause the majority of fragmentation dispersal?
  • What ratio is the most common stadia interval in the United States?
  • What does the Rectify operation accomplish in georeferencing workflow?
  • What is the effect of changing the suffix on a raster file during conversion?
  • The air damage assessment team (ADAT) will record which type of crater diameter?
  • Who usually fills out and submits the Air Force Form 332?
  • In traverse adjustments, to obtain misclosure, which columns are summed?
  • In which column of repair quality criteria (RQC) Worksheet 1 would you note the need for arrestment during a landing operation?
  • During soil strength evaluation, the dynamic cone penetrometer (DCP) recorder notes the number of blows every
  • Which map data comprises facilities, physical features, and utilities within the installation boundary?
  • What system do we use when the water at an austere location is non-potable?
  • Contours generated from a grid pattern are closer to reality if they have what characteristic?
  • Since field notes are legal documents and we do not erase anything, how do we mark corrections?
  • Which test is commonly used to measure the workability of fresh concrete?
  • Which kind of aircraft non-dispersed layout protects an aircraft on only two sides?
  • To assist the paint striping team, centerline cones are offset how far to the left when placing them along the MOS?
  • Which item is NOT typically part of an asphalt mix?
  • The equation, w = (Ww / Ws) x 100, used in conjunction with the oven-dry method, determines which soil characteristic?
  • Which two types of arrays can we use to quickly layout beddown components?
  • In the Geographic Coordinate System Transformations window, how does the program rank options in the 'Using' dropdown list?
  • What name do we give to a roofless cutaway of a build from a bird's eye view?
  • Which kind of aircraft non-dispersed layout uses the least amount of construction materials?
  • In which Unified Facilities Guide Specifications (UFGS) division would you find fire suppression categories?
  • Which tool do we use to create a new file of a layer's data in a different format?
  • What color marks the threshold line on runways?
  • What are mathematical models that translate between coordinate systems?
  • What is the maximum distance, in feet, from the MOS/runway edge for the MAAS exit sheave?
  • Who decides if a project goes competitive bid, IDIQ, or SABER?
  • What path do the utility batter boards follow?
  • Who has the final say regarding the dimensions of a MOS?
  • Because the repair slope matches the runway slope, how are the crater profile measurement test lanes related to the runway centerline?
  • Which item is NOT part of the basic equipment an air damage assessment team (ADAT) needs?
  • Which color marks the departure end line?
  • Which publication would you consult for Bare Base Conceptual Planning?
  • Which statement correctly describes how many shapefile types are produced when exporting CAD to GIS by default?
  • What guides government employees and defines limitations and areas of responsibility for all parties involved in a contract?
  • When adjusting a traverse, which columns do we total to get the misclosure?
  • Which USACE engineering manual has comprehensive instructions on monument installation?
  • Which organization is recommended as a backup imagery source for a mishap location?
  • OPUS requires which file extension to process survey data?
  • What is the web address for GNSS Planning Online?
  • Which of the following is an output field in statistical analysis?
  • What document does the base civil engineer (BCE) use to clear execution of work on an Air Force base?
  • How is a crater 280 feet from the threshold, 60 feet left of the centerline, with a diameter of 40 feet written?
  • The outboard PAPI stake is placed how many feet from the left edge of the runway?
  • Which button in the data connection window opens the Edit Spatial Contexts window?
  • Where are the Survey Styles functions in the survey controller software?
  • For a given asphalt sample, which factor most strongly affects its volume?
  • Which gradation quality describes a soil with a good range of all particle sizes between the largest and smallest for that sample?
  • What person fills the emergency operations center (EOC) director position?
  • What term describes the ratio of the size of an image to the number of grids per unit?
  • What is parallel to lines of longitude from the Earth's rotational axis?
  • When marking cut stakes, where should the cut line be marked on the stake?
  • Which of these is NOT a primary access/egress limitation?
  • Before marking the pavement, the person holding the rod will do what last step during crater profile measurement?
  • The center of light lenses is located how many inches from the PAPI base?
  • When plotting spalls as polygons, which action is performed last?
  • In staking from an intermediate setup, after backsighting and plunging the scope, what is the third and final step?
  • Which item does the 'Export Data' window not ask us to provide?
  • Which screen would you use to view satellite information from multiple constellations and to decide whether to include or exclude satellites?
  • How often, in months, do we conduct inventory on mishap survey kits?
  • Who is currently the primary source for construction document creation, storage, and maintenance at an installation?
  • With a starting azimuth of 48 degrees and after turning counterclockwise 102 degrees, what measurement is our new azimuth?
  • Who approves the DD Form 1391?
  • In the coordinate geometry menu, which page would you use to perform traverse calculations?
  • To represent the ellipsoid in two dimensions, we use a projection called
  • Which checkbox, in the measure rounds options, tells the instrument to measure without surveyor input?
  • Which option correctly expands GCS (Geographic Coordinate System)?
  • Where do we adjust the size of the layout area and its orientation?
  • In the model file naming convention, what is the allowable length for the 1-20 character project code?
  • Which GNSS Planning Online screen allows you to set the location of your survey?
  • Which of the following is NOT a feature definition type in the libraries?
  • The soil sample roll test measures which property?
  • What are the three type groups of vector data?
  • Where in the Statement of Work are the quality expectations and team descriptions?
  • Who is the administrative arm of the emergency operations center (EOC)?
  • After robotic total station setup, which screen provides you the chance to identify any mistakes when entering data?
  • Which two marker light types are required for jet aircraft?
  • What is the standard airfield map scale used by the MAOS team for planning MOS?
  • During crater profile measurement, when performing upheaval measurement, the person holding the rod continues to take one pace toward the stanchion until the
  • In the survey controller menus, where is the traverse computation function located?
  • Three files generate when creating a schema; which file contains instructions on importing the schema?
  • Other than the handbook, where can you get the threshold crossing height (TCH) and/or glide slope for mission aircraft?
  • When conducting the shine test, a definite shine indicates what type of clay?
  • Which reference ellipsoid surface do we use in the Air Force?
  • Which term describes the relative size of features in a drawing?
  • Which tables give data unique characteristics in a dataset?
  • In ADAT operations, which item is used to record damage?
  • What does the 'F' in spall field damage coordinate designate?
  • Which of these is NOT considered a first responder?
  • How many years are temporary monument markers expected to last?
  • Which force module provides the primary aircraft and maintainers?
  • Which element is included in the project code portion of the model file naming convention?
  • In geographic information systems terms, which tool category contains the Merge function?
  • Which USACE manual number focuses on monument installation guidance?
  • What characteristic of sewer pipe installation prevents blockage buildup?
  • Which Catalog tab displays the item’s metadata description?
  • What factor is a major obstacle to utilizing a bi-directional minimum operating surface?
  • Who is in command of the unit control center (UCC)?
  • Which stakes indicate the finish elevations on the job?
  • What two standards are used for enduring construction?
  • Who approves the DD Form 1391?
  • What three categories of contingency construction standards are used for initial force beddown?
  • What work structure is a common environment that we use across agencies?
  • Which tool allows you to select an object and rotate it around the X, Y, and Z axes?
  • When adding the .T02 file to the post processing software, where do you add the corrected OPUS coordinates?
  • What does DOP stand for in GNSS quality metrics?
  • Which decimal value corresponds to 30°10'20" when converted to three decimals?
  • Which editor function allows us to specify an angle and a length to create a line or side of a polygon?
  • Which AFPAM volume contains site layout planning guidelines?
  • The amount of cut or fill is equal to which difference?
  • Which analysis is used to find the cheapest path through a network?
  • During crater profile measurement, if the target triangle on the rod is visible, you should
  • For RTK setup, what action enables the radio settings to display?
  • What increments are the basic expeditionary airfield resources order of battle assets broken into?
  • Which test compares the level of material settled at the bottom of a water-filled jar?
  • Which system provides runway edge and approach lighting upon aircraft arrival?
  • Which tool allows contractors to divide a project into work elements over a given period?
  • In crater notation, what does L60 denote?
  • We group grids together by creating 'samples' at larger scales by way of
  • The OPUS processing service uses a web address on which NOAA domain?
  • What equation is used to convert millimeters to feet?
  • Which item is NOT found in the project code portion of the model file naming convention?
  • Which fields are X field, Y field, and Z field?
  • According to the diagram, what is the maximum distance, in feet, from the MOS/runway edge that the MAAS exit sheave can be placed?
  • What tool does base contracting use to authorize release of payment to the contractor for a period of performance?
  • What determines the precision requirements of a survey?
  • The threshold and departure ends of the runway are marked by what color lines, respectively?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy